Red Hat / CentOS IPv6 Network Configuration

by 햇빛소년 posted May 30, 2012 Views 28484 Likes 0 Replies 0
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 위로 아래로 댓글로 가기 인쇄

국산 통나무 수공예 남원제기, 남원목기

자료가 도움이 되셨다면
혼수용품제수용품 필요시
남원제기 공식 홈페이지 http://남원제기.kr
남원목기 공식 홈페이지 http://otchil.kr
에서 구매 해 주세요
정성껏 모시겠습니다.
 

Red Hat / CentOS IPv6 Network Configuration


by Vivek Gite on January 23, 2009 · 15 comments· last updated at April 5, 2009

Q. How do I configure static IPv6 networking under RHEL 5.x / Fedora / CentOS Linux?

A. Red Hat / CentOS / Fedora RHEL support IPv6 out of box. All you have to do is update two files and turn on networking.

You need to update and configure following files for IPv6 configuration:

    /etc/sysconfig/network : Turn on networking in this file.
    /etc/sysconfig/network-scripts/ifcfg-eth0 : Set default IPv6 router IP and server IP address in this file.

Open /etc/sysconfig/network file, enter:
# vi /etc/sysconfig/network
Append following line:

NETWORKING_IPV6=yes

Open /etc/sysconfig/network-scripts/ifcfg-eth0 (1st network config file)
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
Append following config directives for IPv6:

IPV6INIT=yes
IPV6ADDR=<IPv6-IP-Address>
IPV6_DEFAULTGW=<IPv6-IP-Gateway-Address>

Here is my sample file with mix of IPv4 and IPv6 assigned to eth0:

DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
HWADDR=00:30:48:33:bc:33
IPADDR=202.54.1.5
GATEWAY=202.54.1.3
NETMASK=255.255.255.248
IPV6INIT=yes
IPV6ADDR=2607:f0d0:1002:0011:0000:0000:0000:0002
IPV6_DEFAULTGW=2607:f0d0:1002:0011:0000:0000:0000:0001

Where,

    NETWORKING_IPV6=yes|no - Enable or disable global IPv6 initialization.
    IPV6INIT=yes - Enable or disable IPv6 configuration for all interfaces.
    IPV6ADDR=2607:f0d0:1002:0011:0000:0000:0000:0002 - Specify a primary static IPv6 address here.
    IPV6_DEFAULTGW=2607:f0d0:1002:0011:0000:0000:0000:0001 - Add a default route through specified gateway.

Save and close the file. Restart networking:
# service network restart
Verify your configuration by pinging ipv6 enabled site such as ipv6.google.com:
$ ping6 ipv6.google.com
Sample output:

PING ipv6.google.com(2001:4860:b002::68) 56 data bytes
64 bytes from 2001:4860:b002::68: icmp_seq=1 ttl=59 time=93.2 ms
64 bytes from 2001:4860:b002::68: icmp_seq=2 ttl=59 time=95.0 ms
64 bytes from 2001:4860:b002::68: icmp_seq=3 ttl=59 time=94.2 ms
64 bytes from 2001:4860:b002::68: icmp_seq=4 ttl=59 time=95.2 ms
64 bytes from 2001:4860:b002::68: icmp_seq=5 ttl=59 time=94.8 ms
64 bytes from 2001:4860:b002::68: icmp_seq=6 ttl=59 time=95.1 ms
64 bytes from 2001:4860:b002::68: icmp_seq=7 ttl=59 time=93.3 ms
64 bytes from 2001:4860:b002::68: icmp_seq=8 ttl=59 time=93.8 ms
--- ipv6.google.com ping statistics ---
8 packets transmitted, 8 received, 0% packet loss, time 7010ms
rtt min/avg/max/mdev = 93.268/94.376/95.268/0.799 ms

Traces path to a network host, enter:
$ traceroute6 ipv6.google.com
Print default IPv6 routing table, enter:
$ route -n -A inet6




   

Articles

1 2 3 4 5 6 7 8 9 10